Structural magnetic resonance (MR) images were obtained for all subjects by using axial T
1-weighted spoiled gradient/recall acquisition in the steady state (SPGR), T
2, and proton density sequences (TR=14 msec, TE=5.5 msec, 1.5-mm thickness; TR=4000 msec, TE=20 msec, 3-mm thickness; and TR=4000 msec, TE=100 msec, 3-mm thickness, respectively). The MR images were used to rule out structural abnormalities and to aid in the placement of regions of interest. The orientation of the images was then standardized by realigning the T
1 and K
1 images with the line between the anterior commissure and the posterior commissure (AC-PC line), and applying the same transformation matrix to the distribution volume images
+(39) (
+Figure 1). Four-by-four-pixel regions of interest (1.875 Ć 1.875 Ć 3.375 mm per pixel, x, y, z axis) were placed on the K
1 images. The spatial location of the regions of interest was standardized by using a predefined region-of-interest template (based on stereotactic coordinates, to be described) and following the same AC-PC line orientation and the regional definitions of the Talairach and Tournoux atlas
+(40). To avoid a full nonlinear stereotactic transformation of the images, which may be unreliable for subcortical structures, the regions of interest were adjusted to the individual anatomy when necessary by a trained operator blind to subject and diagnosis and were confirmed by one of us (J.-K.Z.), also blinded. The regions of interest were then transferred to the distribution volume images. The regions of interest were placed in three regions in which specific binding has been previously described
+(41) (one region of interest on each side): caudate, thalamus, and brainstem. The caudate and brainstem were further subdivided into ventral and dorsal areas, since they subserve different functional networks. Each region and subregion was sampled in three consecutive slices. The middle region of interest for each structure was centered by the predefined template in the following stereotactic locations (x, y, z axes, in millimeters): dorsal caudate, 10, 15, 8 and ā10, 15, 8; ventral caudate, 10, 10, ā7 and ā10, 10, ā7; thalamus, 10, ā10, 8 and ā10, ā10, 8; dorsal brainstem, 5, ā30, ā12 and ā5, ā30, ā12; ventral brainstem, 10, ā15, ā12 and ā10, ā15, ā12. The occipital cortex was sampled to provide an estimate of nonsaturable activity, as previously described
+(26) (four regions of interest on each side). The occipital cortex values were then used to normalize the K
1 values (regional K
1 values were divided by occipital cortex K
1 values) to reduce interexperimental variability due to global scaling factors (e.g., variability in the plasma metabolite correction procedures, calibration factors for scanner or well counters). They were also used to obtain an estimate of normalized specific DTBZ binding, commonly referred to as binding potential
+(42), which is based on the distribution volume at equilibrium: (regional distribution volume ā occipital cortex distribution volume) / occipital cortex distribution volume, or distribution volume ratio ā 1. The binding potential is equivalent to the B
max/K
d for this receptor site. Brain time-activity curves from a representative subject for the aforementioned regions and for white matter are shown in
+Figure 2.